Top 10 Best Mono Mosfet Amplifier

Last Update:

Our team studied on 43340 reviews available online for Mono Mosfet Amplifier, chose the finest ones and prepared Mono Mosfet Amplifier Reviews for you. It was very difficult to shortlist the ideal Mono Mosfet Amplifier from thousands of products online. However, We tried to make sure that you get only the Best Mono Mosfet Amplifier from our suggestions. Check our listings-:

Best Mono Mosfet Amplifier
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.

Comparison Chart for Best Mono Mosfet Amplifier

In this article we've included our suggestions for the Mono Mosfet Amplifier after analyzing 43340 reviews.

NoProductScoreAction
1Kicker CX Series CX1800.1 1800W Mono Class D Mosfet Full-Range Car Amplifier9.6Check Prize On Amazon
2Planet Audio PL3000.1D Class D Car Amplifier - 3000 Watts9.6Check Prize On Amazon
3Polk Audio PA D1000.1 Class D MOSFET Monoblock Mobile Audio Amplifier; 500 Watts RMS @ 4 ohms9.4Check Prize On Amazon
4BOSS Audio Systems R3400D Class D Car Amplifier - 3400 High Output9Check Prize On Amazon
54-Channel High Power MOSFET Amplifier - Slim 2000 Watt Bridgeable Mono Stereo 4 Channel Car Audio Amplifier w/ Crossover Frequency and Bass Boost Control8.6Check Prize On Amazon
6Sound Storm EVO1500.1 EVO 1500 Watt8.6Check Prize On Amazon
7BOSS Audio OX3KD Class D Car Amplifier – 3000 Watts8.6Check Prize On Amazon
8Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control8.4Check Prize On Amazon
9Sound Storm EV1500M Evolution 1500 Watt8.4Check Prize On Amazon
10Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power8.2Check Prize On Amazon

Table Of Content:

1. Kicker CX Series CX1800.1 1800W Mono Class D Mosfet Full-Range Car Amplifier

  • 1800 Watts RMS x 1 @ 2 ohms
  • Total Peak Power: 3600 Watts
  • Preamp RCA outputs to daisy chain multiple amps
  • Variable Low-Pass Crossover: 50 – 200Hz 12dB/octave
  • Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz

2. Planet Audio PL3000.1D Class D Car Amplifier – 3000 Watts

  • Power – 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
  • Class D – Power loss is significantly reduced making the amplifier highly efficient.
  • 1 Ohm Stable – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating.
  • Strapping Capable – You are able to strap TWO PL3000.
  • Variable Subsonic Filter – To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies.
  • Variable Bass Boost – Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – Dimensions: 11.9” x 7” x 2.3”, Weight 6.7 lbs.

3. Polk Audio PA D1000.1 Class D MOSFET Monoblock Mobile Audio Amplifier; 500 Watts RMS @ 4 ohms

  • Super-efficient class D design—runs much cooler than conventional amps
  • High-speed MOSFET switching—Power supply with outputs stable into 1 ohm loads
  • Protection—Thermal, DC offset, reverse polarity and short circuit protection
  • Nickel-plated wire terminals & RCA connectors—Ensure maximum signal transfer
  • Level control—adjusts the gain of the channel to match the output voltage from your head unit

4. BOSS Audio Systems R3400D Class D Car Amplifier – 3400 High Output

  • Power – 3400 Watts Max x 1 @1-Ohm, 1700 Watts Max x 1 @2-Ohms, 850 Watts Max x 1 @4-Ohms
  • Class D – Power loss is significantly reduced making the amplifier highly efficient.
  • 1 Ohm Stable – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current.
  • Strapping Capable – You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(s).
  • Variable Subsonic Filter – To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies.
  • Specs – Dimensions: 13.5” x 10.44” x 2.25”, Weight: 7.63 lbs.
  • Warranty – BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.

5. 4-Channel High Power MOSFET Amplifier – Slim 2000 Watt Bridgeable Mono Stereo 4 Channel Car Audio Amplifier w/ Crossover Frequency and Bass Boost Control

  • 1000W RMS / 2000W MAX POWER: The Lanzar 2000 watt 4 channel high power MOSFET amplifier is perfect for your car stereo entertainment system.
  • MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output.
  • SHORT CIRCUIT PROTECTION: This 4 ch amp is also equipped with a 2×30 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions.
  • SLIM SIZE DESIGN: Measuring only 10.

6. Sound Storm EVO1500.1 EVO 1500 Watt

  • 1500 W MAX Power @ 2 Ohm x 1 Channel
  • 750 W MAX Power @ 4 Ohm x 1 Channel
  • High and Low Level Inputs
  • Variable Low Pass Crossover, Variable Bass Boost
  • Remote Subwoofer Control
  • Dimensions: Depth 9.7” x Width 10” x Height 2.3”
  • 6 Year Platinum Online Dealer Warranty

7. BOSS Audio OX3KD Class D Car Amplifier – 3000 Watts

  • POWER: 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms.
  • CLASS D: Power loss is significantly reduced making the amplifier highly efficient.
  • 1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating.
  • STRAPPING CAPABLE: You are able to strap TWO OX3KD amplifiers and double the power that is being sent to your subwoofer(s).
  • WARRANTY: BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.

8. Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control

  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
  • Frequency Response: 20Hz – 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow.
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance

9. Sound Storm EV1500M Evolution 1500 Watt

  • 1500 W MAX Power @ 2 Ohm x 1 Channel
  • 750 W MAX Power @ 4 Ohm x 1 Channel
  • RCA Low Level Inputs, High Level Inputs, Variable Low Pass Crossover
  • Variable Bass Boost, Variable Input Gain Control, Input Sensitivity Selector
  • Remote Subwoofer Control
  • Dimensions: Depth 10” x Width 10” x Height 2.3”
  • 6 Year Platinum Online Dealer Warranty

10. Planet Audio AC1500.1M Monoblock Car Amplifier – 1500 Watts Max Power

  • power: max power output of 1500 watts at 2 ohms into one channel.
  • high level inputs: speaker level inputs are commonly referred to as high-level inputs.
  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting.
  • variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it.

How To Choose The Best Mono Mosfet Amplifier

Does the thought of finding a great Mono Mosfet Amplifier stress you out? Has your mind been juggling between choices when it comes to buying Mono Mosfet Amplifier in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Mono Mosfet Amplifier for themselves. We understand the stress associated with the buying process!

Since you’re here, you are obviously curious about Mono Mosfet Amplifier. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.

There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.

But that’s not always easy, right? That's why we've taken time to compile a list of the best Mono Mosfet Amplifier in today's market, on your behalf, so that there will be no more worries for you.

How did we come up with the list, you ask? How did we create this buying guide?

  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Mono Mosfet Amplifier currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-

  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.


Top Mono Mosfet Amplifier brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.

  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Mono Mosfet Amplifier based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Mono Mosfet Amplifier before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Mono Mosfet Amplifier they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Mono Mosfet Amplifier, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Mono Mosfet Amplifier before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Mono Mosfet Amplifier will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Mono Mosfet Amplifier if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Mono Mosfet Amplifier on the market, the products that got mostly negative ratings get filtered and discarded.
These are the criteria we have chosen our Mono Mosfet Amplifier on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.

Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Mono Mosfet Amplifier featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top