Last Update:
Our team studied on 45531 reviews available online for Guitar Pots, chose the finest ones and prepared Guitar Pots Reviews for you. It was very difficult to shortlist the ideal Guitar Pots from thousands of products online. However, We tried to make sure that you get only the Best Guitar Pots from our suggestions. Check our listings-:
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
Comparison Chart for Best Guitar Pots
In this article we've included our suggestions for the Guitar Pots after analyzing 45531 reviews.
No | Product | Score | Action |
---|---|---|---|
1 | CTS Pot, 250k Audio | 9.6 | Check Prize On Amazon |
2 | Seymour Duncan 500K Potentiometer | 9.6 | Check Prize On Amazon |
3 | ToneShaper Pot Pack, fits most LP | 9.4 | Check Prize On Amazon |
4 | Fender 500K, Split Shaft Potentiometer for Volume or Tone | 9.2 | Check Prize On Amazon |
5 | Guitar Potentiometer Audio Pots A500K OHM Replacement for Electric Guitar Pack of 10 | 9 | Check Prize On Amazon |
6 | CTS Pot, 500k Audio | 9 | Check Prize On Amazon |
7 | Set of 4 (4X) CTS 500K SHORT Split Shaft Audio Taper Potentiometers | 9 | Check Prize On Amazon |
8 | Musiclily Pro Brass Shaft Full Metric B500K Guitar Pots Linear Taper Potentiometers for Electric Guitar/Bass(Set of 4) | 8.6 | Check Prize On Amazon |
9 | CTS 500K Short Shaft Audio Taper Pot | 8.6 | Check Prize On Amazon |
10 | JIM DUNLOP DSP500K Super Pot Split Shaft Potentiometer | 8.2 | Check Prize On Amazon |
Table Of Content:
- CTS Pot, 250k Audio, Split Shaft 4 Pack
- Seymour Duncan 500K Potentiometer
- ToneShaper Pot Pack, fits most LP, 335, and SG-style guitars, 500K Audio, 2 Volume, 2 Tone
- Fender 500K, Split Shaft Potentiometer for Volume or Tone
- Guitar Potentiometer Audio Pots A500K OHM Replacement for Electric Guitar Pack of 10
- CTS Pot, 500k Audio, Split-Shaft 4 Pack
- Set of 4 4X CTS 500K SHORT Split Shaft Audio Taper Potentiometers
- Musiclily Pro Brass Shaft Full Metric B500K Guitar Pots Linear Taper Potentiometers for Electric Guitar/Bass...
- CTS 500K Short Shaft Audio Taper Pot
- JIM DUNLOP DSP500K Super Pot Split Shaft Potentiometer
1. CTS Pot, 250k Audio
- Genuine CTS pots, the brand used by nearly every American guitar company for half a century!
- 250k 10% audio-taper, mimics the logarithmic way humans perceive changes in volume better than any other taper.
- 24-tooth knurled split-shaft, designed for plastic knobs that push on.
- 3/8-32 bushing thread is 3/8″ diameter, 1/4″ long. For mounting to pickguards or control plates.
- CTS low torque design (dimpled back) is easy to turn, this is the style used on Strats since the 1950s.
2. Seymour Duncan 500K Potentiometer
- Smooth Turning 500k Potentiometer
- Custom-crafted by Bourns
- For Volume or Tone Control; Knob Not Included
- Split Shaft fits More Knobs
- Evenly Tapered Control
3. ToneShaper Pot Pack
- Unique CTS low-torque pots, easier to turn than CTS pots with flat backs, as typically used by that Nashville company, and by PRS and others!.
- Top-quality pots in a 4-pack that saves you money!
- 1/2” bushing lengths get through the top on most rear-rout guitars with threads to spare!
- Hardware included. UTS thread sizes may require hole enlargement on non-USA guitars.
4. Fender 500K, Split Shaft Potentiometer for Volume or Tone
- Genuine Fender Replacement Part
- High Quality
- Durable
- Country of Origin: Taiwan, Province Of China
5. Guitar Potentiometer Audio Pots A500K OHM Replacement for Electric Guitar Pack of 10
- Long Knurled and split shaft, Full Size
- Perfect for replacing and upgrading volume and tone controls.
- A500K-ohm mini control pot
- Coarse knurled shaft fits most control knobs
- Any problem, please don’t hesitate to contact us
6. CTS Pot, 500k Audio
- Genuine CTS pots, the brand used by nearly every American guitar company for half a century!
- 500k 10% audio-taper, mimics the logarithmic way humans perceive changes in volume better than any other taper.
- 24-tooth knurled split-shaft, designed for plastic knobs that push on.
- 3/8-32 bushing thread is 3/8″ diameter, 1/4″ long. For mounting to pickguards or control plates.
- CTS low torque design (dimpled back) is easy to turn, this is the style used on Strats since the 1950s.
7. Set of 4 (4X) CTS 500K SHORT Split Shaft Audio Taper Potentiometers
- CTS 500K Split Shaft Audio Taper Pots – 3/8″ bushing height and diameter
- Aluminum bushing and shaft
- 236 diameter fine spline (24-tooth) shaft for use with push on knobs
- Suitable for either volume or tone controls – 15% Tolerance
- Imperial (U.S. sizing) NOT for use with import guitars using metric components
8. Musiclily Pro Brass Shaft Full Metric B500K Guitar Pots Linear Taper Potentiometers for Electric Guitar/Bass(Set of 4)
- These pots are widely used guitar tone and volume controls.
- 6mm knurled split brass shaft fits a coarse-knurled (18-spline) knob.
- Metric sized, Thread M8 x 0.
- Linear taper with standard ±20% resistance tolerance, 500K-ohm pots are standard controls for humbuckers.
- Package included: 4 pieces potentiometers, nuts and washers
9. CTS 500K Short Shaft Audio Taper Pot
- CTS 500K Split Shaft Audio Taper Pots – 3/8″ bushing height and diameter – Part #450S4072
- Aluminum bushing and shaft
- 236 diameter fine spline shaft for use with push on knobs
- Suitable for either volume or tone controls – 15% Tolerance
- Imperial (U.S. sizing) not for use with guitars using metric components
10. JIM DUNLOP DSP500K Super Pot Split Shaft Potentiometer
- High performance 500K potentiometer
- Fine-knurled (24 spline) split shaft
- Audio taper
- Sealed construction resists dust & corrosion
Guitar Pots Buying Guide
Does the thought of finding a great Guitar Pots stress you out? Has your mind been juggling between choices when it comes to buying Guitar Pots in general, specifically regarding which model to choose?If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Guitar Pots for themselves. We understand the stress associated with the buying process!Since you’re here, you are obviously curious about Guitar Pots Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.But that’s not always easy, right? That's why we've taken time to compile a list of the best Guitar Pots in today's market, on your behalf, so that there will be no more worries for you.How did we come up with the list, you ask? How did we create this buying guide?- First, our algorithms collected as much information available about these products from trusted sources.
- We employed both Artificial Intelligence and large data volume to validate all collected information.
- Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Guitar Pots currently on the market!
- Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
- Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Guitar Pots based on that.
- Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
- Customer Ratings: The hundreds of customers using the Guitar Pots before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
- Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Guitar Pots they used.
- Seller Rank: Now, this is interesting! You don’t just need a good Guitar Pots, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
- Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Guitar Pots before putting them on the list.
- Durability: Durability and reliability go hand to hand. A robust and durable Guitar Pots will serve you for months and years to come.
- Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Guitar Pots if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
- Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Guitar Pots on the market, the products that got mostly negative ratings get filtered and discarded.